Shure P2T Wireless Transmixer

The P2T TransMixer is breakthrough design for personal monitoring. It allows the user to connect two line-level or miclevel inputs directly into the transmitter. The two signals can then be mixed independently. You can connect microphones or instruments directly to the inputs or use line outputs from a mixing console. In short, no matter what the output device, you can probably plug it into the TransMixer.  For use with PSM 200 monitors.

• Built-in audio limiter, Front mounted antenna, Two mic/line input channels for mix control, 1/2 Rack space
• Operating Controls:  Input level control, Frequency select
• LED Indicators:  Tri-color input level, Frequency
• Inputs:  Two Mic/line, XLR-1/4 in. combo input channels
• Outputs:  Two XLR split outputs

• RF Output Power: 30 mW (+15 dBm) typical conducted (country dependent)
• Modulation Limiter: Internal peak limiter (>10:1 hard knee compression)
• Antenna: 1/4 Wavelength, semi-rigid, PCB Mount
• P2T Audio Input Connector Type: XLR-1/4-inch combo
• Configuration: electronically balanced
• Actual Impedance: 1 kilohm
• Nominal Input Level: 25 dBu @ 1/2 volume (12 o'clock)
• Maximum Input Level: 5 dBu @ 1/2 volume (12 o'clock)
• Pin Assignments: XLR: 2=hot; 3=cold, 1=ground 1/4: Tip = hot, Ring = cold, Sleeve=ground
• Phantom Power Protection Up to 52 Vdc