|
|
|
Shure Headworn PG Series Wireless Headworn System
Manufacturer: Shure
MPN: PgX14/Pg30H6
SKU: PgX14/Pg30H6
Price: $429.00
Retail: $536.00
You Save: $107.00 (20%)
This item is out of stock
|
The PGX Digital Wireless Presenter System is perfect for performers who need clear, precise and hands-free vocal reproduction. The included PG30 Headset Condenser Microphone provides smooth, natural frequency response comparable to quality handheld microphones, and a comfortable, adjustable, and secure fit.
Included: PGXD4 wireless receiver, PGXD1 bodypack transmitter, PG30 headset microphone, padded carrying case
- Headset microphone with comfortable, adjustable, secure fit
- Smooth, natural frequency response tailored to vocals
- Power, mute, and battery status LED
- Up to 10 hours of continuous use from 2 AA batteries
- 200 ft (60 m) operating range
- Rugged construction for reliable performance show after show
- Low profile bodypack, easily clips onto belts or guitar straps
PGXD4 Wireless Receiver Features
- 24-bit / 48 kHz digital technology for incredibly accurate sound
- Automatic frequency selection locates a clear channel instantly
- One-touch sync automatically syncs the transmitter and receiver
- True digital diversity for rock-solid wireless signal reliability
- Up to 10 compatible channels per frequency band
- ¼” and XLR audio outputs
- Included padded carrying case for portability and protection
PGXD1 Specifications
- Audio Input Level: +10 dBV maximum, at minimum gain setting, -16 dBV maximum, at maximum gain setting
- Gain Adjustment Range: 26 dB
- Input Impedance: 1 M ohms
- RF Output Level: 10 mW maximum (dependent on applicable countryregulations)
- Dimensions: 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
- Weight: 128 grams (4.5 oz.) without batteries
- Housing: Molded polycarbonate case
- Power Requirements: 2 “AA” size
- Battery Life: Up to 10 hours
PGXD4 Specifications
- Dimensions: 40 mm H X 181 mm W X 104 mm D (1.6 x 7.125 x 4.1 in.)
- Weight: 289 g (10.2 oz.)
- Housing: ABS
- Audio Output Level: (ref. ± 38 kHz deviation, 1 kHz tone): XLR connector (into 3000 O load): -2.5 dBV / 1/4 inch connector (into 10000 O load): +10 dBV
- Impedance: XLR: 50 O / 1/4 inch: 50 O
- Sensitivity: -102 dBm @ 10-5 BER
- Image Rejection: > 70 dB, typical
- XLR output: Impedance balanced; Pin 1: Ground (cable shield), Pin 2: Audio, Pin 3: No Audio
- Audio LED: Red: 2 dB below clip, Amber: 12 dB below clip, Green: 50 dB below clip
- Power Requirements:12-18 Vdc at 150 mA, supplied by external power supply
- Pin Assignments:XLR: 1=ground, 2=hot, 3=cold6.35 mm (1/4”) TRS: Tip=audio, Ring=no audio,Sleeve=ground
System Specifications
- Operating Range: 60 m (200 ft.) under typical conditions. Note: actual range depends on RF signal absorption, reflection and interference.
- RF Carrier Range: X8: 902–928 MHz, X8A: 915–928 MHz, X8B: 902–907.5 MHz, 915–928 MHz (Note: varies by region)
- Audio Frequency Response (± 2dB): 20-20000 MHz
- System Gain: PGXD2: 0 dB at minimum gain setting, 6.35 mm (1/4“) connector / -12.5 dB at minimum gain setting, XLR output
- PGXD1: -54.5 dBV/Pa at -10 dB gain setting, with SM58 catridge, XLR output
- Total Harmonic Distortion: <0.02%, A-weighted, typical (Ref. 1 kHz, 6 dB below input clip)
- Dynamic Range: >108 dB A-weighted
- Operating Temperature Range: -18°C (0°F) to +50°C (+122°F). Note: battery characteristics may limit this range.
|
|
