Shop by Brand

Free Shipping! One Orders Over $200
 
Bookmark this page
Shure KSM32 Embossed Single-Diaphragm Microphone
 

Shure KSM32 Embossed Single-Diaphragm Microphone

Manufacturer: Shure
MPN: KSM32/SL
SKU: KSM32/SL
Price: $549.00
Retail: $686.00
You Save: $137.00 (20%)
This item is out of stock
Quantity:

Key Features
  • Class A, transformerless preamplifier circuitry eliminates cross-over distortion for improved linearity across the full frequency range.
  • Embossed, high-compliance diaphragm provides extended low-frequency response.
  • Ultra-thin, gold-layered, low-mass, Mylar diaphragm for excellent transient response
  • 15 dB attenuation switch for handling extremely high sound pressure levels (SPL)
  • Switchable low-frequency filter provides greater flexibility to reduce background noise or to counteract proximity effect.
  • Integrated three-stage pop protection grille reduces "pop" and other breath noise
  • Internal shock mount reduces transmission of handling noise
  • Performance Characteristics
  • Extended frequency response
  • Very low self-noise
  • Exceptional low-frequency reproduction
  • High output level
  • High input SPL capability
  • No cross-over distortion
  • Extremely uniform polar response
  • Superior common mode rejection and suppression of radio frequency interference
Applications

Some typical applications for the KSM32 are listed below. Microphone use, however, is a matter of personal taste. The KSM32 may be used for a variety of applications other than those listed.

  • Voice -- solo, background, voice-over, broadcasting
  • Acoustic instruments -- such as piano, guitar, drums, percussion, strings
  • Wind instruments -- brass and woodwind
  • Low frequency instruments -- such as double bass, electric bass, kick drum
  • Overhead miking -- drums or percussion
  • Ensembles -- choral or orchestral
  • Room ambiance pick-up -- guitar amplifier or drums
Specifications
  • Type: Permanently Biased Condenser
  • Frequency Response: 20  to 20,000 Hz
  • Directional Polar Pattern: Cardioid/Omnidirectional
  • Output Impedance: 150 ohms (actual)
  • Attenuation Switch: 0 or -15 dB attenuation
  • Low Frequency Response Switch: Flat; 6 db/octave below 115 Hz; -18 dB/octave below 80 Hz
  • Phantom Power: 48 Vdc +/- 4 Vdc (IEC 268 15/DIN 45 596), positive pins 2 and 3
  • Current Drain: 4.65 mA typical at 48 Vdc
  • Common Mode Rejection: ≥50 dB, 20 Hz to 20 kHz
  • Sensitivity (typical, at 1000 Hz; 1 Pa = 94 dB SPL): -36 dBV/Pa (16 mV)
  • Self noise (typical, equivalent SPL; A-weighted, IEC 651): 13 dB
  • Polarity: Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
  • Weight: 17.3 ounces

E-mail a friend about this item.

Return to Catalog